![LGJ-10 Laboratory Freeze Dryer -80C with Type D Chamber LGJ-10 Laboratory Freeze Dryer](https://vekuma.com/wp-content/uploads/2023/11/LGJ-10-Laboratory-Freeze-Dryer-80C-with-Type-D-Chamber.jpg)
Introduction
The LGJ-10(-80C) laboratory freeze dryer was designed to freeze dry low eutectic point materials. It is benchtop type inbuilt with a 5L ice condenser, effective water collect capacity 4Kgs in 24hrs period, lowest temperature -80C.
Technical Parameters
Model | LGJ-10 (-80C) |
---|---|
Condenser | 4Kgs/24Hrs |
Condenser Temp. | -80C |
Size (W/O Chamber) | W/520*D/685*H/525mm |
Weight | 65Kgs |
Voltage | 110V/220V |
Power Install | 1180w |
Technical Description
- Portable benchtop design with minimum footprint.
- Powder coated steel exterior with rubber feet.
- S/S upright ice condenser inbuilt freeze dryer base unit.
- -80C condenser temperature.
- Full color, 7″ touch screen controller with LYO-LAB V2.0:
- Real-time shows temperature readings of condenser and product, along with the vacuum degree.
- Large buttons to control compressor and vacuum pump working, and condenser defrosting.
- Real-time curve of condenser and product temperature, and vacuum degree.
- Data-logging functionality and can be exported via USB.
- System time setting, screen time out, system total running hours, and alert of vacuum pump oil change.
- Vacuum unit change between Pa and mBar.
- Temperature sensors calibration.
- System log-out and password enter.
- Vacuum pump auto shut off if chamber pressure not reduce.
- Vacuum pump will not active if condenser temperature not reach datum point of -40C (adjustable).
- Side mounted vacuum port.
- Side mounted vacuum break valve.
- Side mounted defrost water drain valve.
- Rear mounted vacuum pump power socket.
- 6 selections of drying chambers, standard, stoppering and manifolds.
Accessories
- Standard drying chamber.
- Stoppering drying chamber.
- Standard drying chamber with 8 manifolds (for flask).
- Stoppering drying chamber with 8 manifolds (for flask).
- 24 or 48 manifolds rack (for ampoules).
- 8, 12, 16 or 24 manifolds rack (for flasks).
- Rubber valve for round bottom flask.
- Rubber valve for wide neck flask.
Options
- S/S316L condenser.
- PTFE coated condenser.
- S/S316L shelves and trays.
- Oil sealed vacuum pump.
- Dry vacuum pump.
- Hybrid vacuum pump.
- Vacuum adjustable.
- Eutectic point testing package.
Reference
![LGJ-10–80C-4Kgs-Laboratory-Benchtop-Freeze-Dryer LGJ-10 Laboratory Freeze Dryer](https://vekuma.com/wp-content/uploads/2023/05/LGJ-10-80C-4Kgs-Laboratory-Benchtop-Freeze-Dryer.jpg)
LGJ-10 -80C Benchtop Freeze Dryer