LGJ-10 Laboratory Freeze Dryer

The Vekuma LGJ-10 laboratory freeze dryer is recommended for a variety of laboratory applications including lab R&D, samples preservation and lyophilization testing. The high performance table top unit delivers condenser temperature as low as -80C.

Base Unit: Powder coated steel exterior, with an upright stainless steel ice condenser inbuilt, the condenser is chilled by coolant direct expand and is allowed for raw material pre-freezing. A wide range of accessories can be connected to the ice condenser to expand freeze dryer functions. Lateral of base unit has vacuum port, vacuum release valve and water drain valve. Freeze dryer power cable and vacuum pump power plug is located on rear side of base unit.

Control System: A 7” touch screen HMI is mounted on the freeze dryer base unit, it real-time displays condenser temperature, product temperature and vacuum degree. 3 large buttons on touch screen bottom are use to control compressor and vacuum pump working and condenser defrosting. Sub-pages include debugging interface of system setting and sensors calibration, real-time drying curve and data downloaded.

Drying Chamber: The drying chamber available in 6 selections, from bulk to manifold, to enable products dried in trays, vials, ampoules, flasks and other glass bottles.

Vacuum Pump: A 2-stage oil sealed rotary vane vacuum pump is included in the standard offer. Vacuum pump connects to freeze dryer by a hose and a pair of tri-clamp.

• Benchtop type.
• Microprocessor and touch screen based controller, HMI displays system working status and key parameters.
• S/S upright ice condenser inbuilt freeze dryer base unit.
• Smooth wall type ice condenser.
• 1 compressor for -55C version, 2 compressors for -80C version.
• Air cooled refrigeration system.
• Side mounted defrost water drain valve.
• 2-stage oil sealed rotary vane vacuum pump.
• Vacuum pump and freeze dryer connect by a hose and tri-clamp.
• Side mounted vacuum port.
• Side mounted vacuum break valve.
• Rear mounted vacuum pump power socket.

• Standard drying chamber.
• Stoppering drying chamber.
• Standard drying chamber with 8 manifolds (for flask).
• Stoppering drying chamber with 8 manifolds (for flask).
• 24 or 48 manifolds rack (for ampoules).
• 8, 12, 16 or 24 manifolds rack (for flasks).
• Rubber valve for round bottom flask.
• Rubber valve for wide neck flask.

• S/S316L condenser.
• PTFE coated condenser.
• S/S316L shelves and trays.
• Dry vacuum pump.
• Vacuum adjustable.
• Eutectic point testing package.