Introduction
The LGJ-10Plus is an expansion of the LGJ-10 laboratory freeze dryer, which offers larger condenser and drying chamber capacity. It is benchtop designed, compact size save your valuable lab space. The LGJ-10Plus is ideal for laboratory basic research and samples preparation, capable of drying small volume products.
The LGJ-10Plus freeze dryer comes with an upright stainless steel ice condenser, 8L volume, robust performance that can collect up to 4kgs vapors in 24hrs. Condenser temperature available in -55C and -80C.
Technical Parameters
| Model | LGJ-10Plus (-55C) | LGJ-10Plus (-80C) |
|---|---|---|
| Condenser | 3Kgs/24Hrs | 4Kgs/24Hrs |
| Condenser Temp. | -55C | -80C |
| Size (W/O Chamber) | 480*640*350mm | 580*680*520mm |
| Weight | 55Kgs | 75Kgs |
| Voltage | 110V/220V | 110V/220V |
| Power Install | 600w | 1180w |
Key Features
- Portable benchtop design.
- Powder coated steel exterior with rubber feet.
- Inbuilt an upright, stainless steel, smooth wall type ice condenser.
- 8L condenser volume.
- 1 set compressor for -55C version, 2 sets compressors for -80C version.
- Condenser can use for samples freezing.
- Full color, 7″ touch screen controller with LYO-LAB V2.0:
- Real-time display condenser temperature, product temperature and chamber vacuum.
- Real-time curve of condenser temperature, product temperature and chamber vacuum.
- Data-logging functionality and can be exported via USB.
- Large buttons to turn on/off compressor, vacuum pump and condenser defrost.
- System time setting, screen time out, system total running hours, and alert of vacuum pump oil change.
- Vacuum unit change between Pa and mBar.
- Temperature sensors calibration.
- System log-out and password enter.
- System protections: Vacuum pump auto shut off if chamber pressure not reduce. Vacuum pump will not active if condenser temperature higher than -40C.
- Replaceable product chamber, 6 types available (bulk, stoppering, manifold and combined), enable samples to be dried in trays, vials, bottles, flasks, ampoules or simultaneously.
- Lubrication-free product chamber rubber seal.
- Freeze dryer and vacuum pump connect by KF25 clamps and vacuum hose.
- Side mounted vacuum port.
- Side mounted vacuum break valve.
- Side mounted defrost water drain valve.
- Rear mounted vacuum pump power socket.
Reference
Installed LGJ-10 Laboratory Freeze Dryer
Size Comparation of LGJ-10 -80C and -55C
