Introduction
The LGJ-20Plus is an expansion of the LGJ-20 laboratory freeze dryer which offers larger capacity and ultimate condenser temperature (-120C version available). The range freeze dryers are designed for laboratory R&D and samples preparation. Can dry common materials, low eutectic point materials and solvent mixtures.
The LGJ-20Plus freeze dryer comes with an upright stainless steel ice condenser, 17L volume, robust performance that can collect up to 9kgs vapors in 24hrs. Condenser temperature available in -55C, -80C and -120C.
Technical Parameters
| Model | LGJ-20Plus (-55C) | LGJ-20Plus (-80C) | LGJ-20Plus (-120C) |
|---|---|---|---|
| Condenser | 6Kgs/24Hrs | 8Kgs/24Hrs | 9Kgs/24Hrs |
| Condenser Temp. | -55C | -80C | -120C |
| Size (W/O Chamber) | 680*550*950mm | 810*550*950mm | 810*650*950mm |
| Weight | 75Kgs | 115Kgs | 125Kgs |
| Voltage | 110V/220V | 110V/220V | 110V/220V |
| Power Install | 850w | 1550w | 2000w |
Key Features
- Freestanding with wheels, easy to move and install.
- Powder coated steel exterior.
- Inbuilt an upright, stainless steel, smooth wall type ice condenser.
- 17L condenser volume.
- 1 set compressor for -55C version, 2 sets compressors for -80C and -120C version.
- Condenser can use for samples freezing.
- Full color, 7″ touch screen controller with LYO-LAB V2.0:
- Real-time display condenser temperature, product temperature and chamber vacuum.
- Real-time curve of condenser temperature, product temperature and chamber vacuum.
- Data-logging functionality and can be exported via USB.
- Large buttons to turn on/off compressor, vacuum pump and condenser defrost.
- System time setting, screen time out, system total running hours, and alert of vacuum pump oil change.
- Vacuum unit change between Pa and mBar.
- Temperature sensors calibration.
- System log-out and password enter.
- System protections: Vacuum pump auto shut off if chamber pressure not reduce. Vacuum pump will not active if condenser temperature higher than -40C.
- Replaceable product chamber, 6 types available (bulk, stoppering, manifold and combined), enable samples to be dried in trays, vials, bottles, flasks, ampoules or simultaneously.
- Lubrication-free product chamber rubber seal.
- Freeze dryer and vacuum pump connect by KF25 clamps and vacuum hose.
- Side mounted vacuum port.
- Side mounted vacuum break valve.
- Side mounted defrost water drain valve.
- Rear mounted vacuum pump power socket.
Reference
Installed LGJ-20 Laboratory Freeze Dryer
LGJ-20 Laboratory Freeze Dryer with Heated Shelves
