Introduction
The clean room configuration BFD-10 pilot freeze dryer perfect fit laboratories and pilot plants that require a higher hygiene level.
Machine front door is mounted on clean room wall for product loading and unloading, system will be installed in technical room. This design can minimum your install space and avoid noise.
Technical Parameters
| Model | BFD-10 Clean Room Config |
|---|---|
| Shelves Area | 0.47~1.26m2 |
| Shelves No. | (3~8)+1 |
| Shelves Size | 350*450mm |
| Shelves Temp. | -55C~+70C |
| Condenser | 15Kgs/24Hrs, 30kgs total. |
| Condenser Temp. | -85C |
| Final Vacuum | 0.01mBar |
| Power Install | 7.5Kw |
| Size | W/900*D/1600*H/1700mm |
| Weight | 750Kgs |
Technical Description
- All-include body, with casters and height adjustable feet.
- Inbuilt vacuum pump with oil mist filter.
- Advanced PLC and user-friendly HMI based control system, LYO-PILOT software.
- Pressure vessel standard S/S drying chamber.
- Transparent acrylic chamber door.
- Cooling and heating shelves from -55C to +70C.
- Horizontal cylindrical ice condenser, lowest -85C.
- Transparent acrylic condenser door.
- Condenser auto defrost.
- 2 stage oil sealed rotary vane vacuum pump.
- Pirani type vacuum sensor.
- Vacuum final 0.01mbar and is adjustable.
- Air cooled, cascade compressor system.
- Documents and validation package include in standard offer.
System Performance
- Chamber inner wall roughness Ra<0.6um
- Shelves flatness <0.5mm/m
- Shelves roughness Ra<0.4um
- Shelf cooling: +20C ~ -40C <60min
- Cooling final: -55C (+/-2C)
- Shelf heating: -40C ~ +20C <60min
- Heating final: +70C (+/-1.5C)
- Condenser inner wall roughness Ra<0.6um
- Condenser coils roughness Ra<0.4um
- Condenser cooling: RT ~ -40C <30min
- Condenser final: -85C
- Defrosting: <60Min
- Vacuum final: <1Pa
